If you need to use modern computing power and networking technology beyond the physical boundary of computers and servers, come to us. We are masters of interfacing computers and intelligent systems to other systems. If you need an automated manufacturing system, to control traffic, regulate power flow, log and analyse instrument data, Algonics is your one stop solution. We can bring your data to the internet, give it to your mobiles and seamlessly interface with your legacy systems. Some of our solutions are as below.

Solar Powered water pump system :

A solar water pump has a DSP controlled power electronic engine at its heart and consists of a matching solar array of modules - calibrated with the equivalent power of pump for that particular application. Irrigation pumps such as submersible, surface or deep well can also be coupled with drip irrigation systems to enhance the returns from this configuration. A typical solar water pumping system is configured by the solar array size that is required to run the pump. A 4000 Wp solar water pump is sufficient for drawing and pumping approximately 160,000 litres of water per day from a source that is about 10 meters deep. This is can irrigate about 8 acres of land. A 4000 Wp solar water pump helps save up to Rs 1,85,000 when compared with a diesel-operated pump run for an year.

Algonics designs and manufactures different configuration of such systems. We make systems based on commercially off the shelf available AC pumps of all kinds. These are driven by intelligent electronic inverters such that the flow of water changes with the change in intensity of the incident solar energy. This helps in harvesting maximum solar energy.

Solar Inverter with balanced AC input supply :

Features:

This is a configuration on use solar power to supply AC loads maximising the best use of solar power but augmenting it with AC gird supply to feed the load optimally.

Advantages:

Maximising usage of solar power to a load.
Optimally supplying power to an ac load.
Battery less system.

Algonics is into designing and manufacturing such power supply configuration .

Solar power augmented high reliability UPS systems :

Features:

1. Usage of bi directional inverters, i.e. the same device acts as inverter as well as battery charger as per the requirement.
2. Dual redundant configuration for high reliability.
3. Parallel configuration of redundant MPPT chargers for added reliability.
4. Redundant inverter changeover time within 25 mS.

Usage: These systems are designed for usage areas with requirement for high reliability and availability like Indian Railways. Algonics has detailed experience of such systems.

Solid state variable voltage variable frequency power source :

Algonics manufactures solid state IGBT based variable voltage, variable frequency power sources required for testing various AC powered devices and equipment.

These power sources are protected for over current and short circuits. These have LCD based operator interface. The voltage and frequency can be controlled by push buttons from operator panel and the power parameters can be read back from the LCD. The power supplies are based on IGBT based pure sine wave switching with a voltage THD of less than 4%. The outputs are filtered with finely tuned LC filters. To limit any saturation of magnetic circuits, these power supplies can be tuned for V/F limit.

Range: Input 3 phase 415V or 2 phase 240V AC
Output: 0-300V AC with capacity upto 15KVA.
Input and output transformer isolation can be implemented as per customer requirement.

Solid state double voltage double frequency power source :

Algonics manufactures sold state double voltage double frequency power sources required for standard testing of various transformers, ferro-resonant voltage regulators and inductor based power equipment.

These power sources are protected for over current and short circuits. These have LCD based operator interface. The voltage and frequency can be controlled by push buttons from operator panel and the power parameters can be read back from the LCD. The power supplies are based on IGBT based pure sine wave switching with a voltage THD of less than 4%. The outputs are filtered with finely tuned LC filters. To limit any saturation of magnetic circuits, these power supplies can be tuned for V/F limit.

Range: Input 3 phase 415V or 2 phase 240V AC
Output: 0-300V AC with capacity upto 15KVA.
Input and output transformer isolation can be implemented as per customer requirement.